Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Console flushed into bulkhead

NickParker

Electrical
Joined
Sep 1, 2017
Messages
455
Location
NL
Can the console can be flush with the bulkhead without any maintenance issue (snapshot below)?
Console_.png
 
It's no different than setting it on a deck. Standoff is preferred to allow inspection of coatings but if the space is climate controlled corrosion should be a minimal issue.
 
Depending on what is inside the console (and the actual user specification) you might be required to provide interior access. This can be from the back, one or both ends, or even under the "shelf". For example - if the console contains a battery backup for something, you WILL need access to the interior of the console.
 

Part and Inventory Search

Sponsor

Back
Top