Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

connector solid by Patran/Nastran

Status
Not open for further replies.
zski04

zski04

New member
Joined
Jul 13, 2009
Messages
2

I need some suggestion about how do I set connector between solid and solid by MSC Patran/Nastran? cause I found connector>>spot weld module but it use for surface.

If I want to set stiffness at connector point (solid+solid), can I do it?

Thank you in advance for your kindness to help me.
 
Status
Not open for further replies.

Similar threads

MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
Carlo Alberto
  • Locked
  • Question Question
Patran Problems
Replies
4
Views
1K
Onda
Onda
Mohamed Mowafy
  • Locked
  • Question Question
MSC Patran Subcases issue
Replies
2
Views
1K
Mohamed Mowafy
Mohamed Mowafy
MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
638
MihaelaN
MihaelaN
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
695
gandoglassy
gandoglassy

Part and Inventory Search

Sponsor

Back
Top