Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connector Element

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
Hi, I'm new to ABAQUS/CAE. I want to do kinematic analysis using connector element. How should I start? In previous time, I imported geometry using STEP format and just run the analysis..and I am not familiar with editing keywords. Now, how to play with connector element??HOW TO START...Please help....
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
Cohesive element distorted
Replies
1
Views
3K
FEA way
FEA way
jball1
  • Locked
  • Question Question
Connector Damage/Failure
Replies
6
Views
1K
jball1
jball1
X
  • Locked
  • Question Question
VUSDFLD Element Deletion
Replies
1
Views
1K
FEA way
FEA way
V
  • Locked
  • Question Question
Tensioned element and loads
Replies
2
Views
1K
valbe
V
hwa0725
  • Locked
  • Question Question
ABAQUS: Connector Response Not Matching Input
Replies
2
Views
499
hwa0725
hwa0725

Part and Inventory Search

Sponsor

Back
Top