Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connecting a wind power station to existing net (GRID)

Status
Not open for further replies.

electpower

Electrical
Mar 19, 2008
18
Could any one suggest what should be calculated in order to connect a wind power plant or any power generation plant to the existing net/grid.
Where can i get information regarding the above said issue.

Best regards
electpower
 
Replies continue below

Recommended for you

I'd start with the interconnect requirements of the system you intend to connect to.
 
Could you please suggest me, some reading materials for getting more information on interconnection requirement.
Thankyou for your suggestions.
 
electpower,
The right place for you to approach is the office (or the website if there is one) of Grid authority in your area. They usually have documents which stipulate the requirements to be complied with.
Or it could be Grid Regulatory authority of the province.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor