config.pro setup to preview drawings

[ediushu]

What is the config.pro setup to get the drawings preview when I use "File Open"- "Preview". I can see the ".prt" and ".asm" files but I can't see the "drw" files.
Thanks!

 

[Tofflemire]

Hi Ediushu

The config.pro setting is save_drawing_picture_file "embed".
If I recall, this will not work until you have saved the drawing once with this setting, so this will not work on any drawing previously saved without this set.

Tofflemire

 

[ediushu]

Thanks Tofflemire. It works. You right, you should save the drawing having this setting done in order to be able to see it.

ediushu