Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Condition Based Maintenance Program

Status
Not open for further replies.

nasirqa1407

Mechanical
May 30, 2012
14
RO
I have a huge number of Caterpillar engines for drilling operations in so many failed. When I concern the amount of our Preventive Maintenance is cost huge amount. Now, I'm thinking of using another strategy to maintain my equipment by establishing Condition Based Maintenance Program. Please provide me your thoughts from the field & experience? Also, the best establishment method?
 
Replies continue below

Recommended for you

Obviously you need a means to assess condition of the equipment- is there data gathered about the equipment's condition and then you need to determine the equipment's reliability that you need and then its complex analysis to see if CBM makes sense.

I think this is more Reliability Engineering rather than Project Engineering. I suggest you post a thread in


and link back to this one.

Use translation assistance for Engineers forum

Note the rules include No Student posting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor