Whe
Mechanical
- Apr 29, 2002
- 8
What is a good way of calculating the rate of condensation of steam in a tank due to a cold inlet flow of water, through a nozzle in the roof?
The water falls up to 8m to the floor of the tank. There is no spray nozzle, just the open pipe.
This is a sealed tank at atmospheric pressure. The rate of condensation affects vacuum protection.
The water falls up to 8m to the floor of the tank. There is no spray nozzle, just the open pipe.
This is a sealed tank at atmospheric pressure. The rate of condensation affects vacuum protection.
