Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Condensate Flash Tanks
- Thread starter KFF
- Start date
There is a sizing program at This is an industry that operates much of its process below atmospheric pressure, so its designs should be suitable.
I'll let you rummage around on the site and find the program. Look at 'engineering guides'.
rmw
I'll let you rummage around on the site and find the program. Look at 'engineering guides'.
rmw
KFF:
Take a look at faq798-1153 <== click here
You may find it most useful. I am fairly sure that the methodology given in that FAQ would be applicable for a condensate flash drum operating under some vacuum.
Milton Beychok
(Visit me at www.air-dispersion.com)
Take a look at faq798-1153 <== click here
You may find it most useful. I am fairly sure that the methodology given in that FAQ would be applicable for a condensate flash drum operating under some vacuum.
Milton Beychok
(Visit me at www.air-dispersion.com)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
