Nov 30, 2005 #1 KFF Industrial Nov 30, 2005 1 I'm looking for sizing design guides for condensate flash tanks operating below atmposheric pressure.
I'm looking for sizing design guides for condensate flash tanks operating below atmposheric pressure.
Nov 30, 2005 #2 rmw Mechanical Feb 6, 2002 5,724 There is a sizing program at http://www.sugartech.co.za This is an industry that operates much of its process below atmospheric pressure, so its designs should be suitable. I'll let you rummage around on the site and find the program. Look at 'engineering guides'. rmw Upvote 0 Downvote
There is a sizing program at http://www.sugartech.co.za This is an industry that operates much of its process below atmospheric pressure, so its designs should be suitable. I'll let you rummage around on the site and find the program. Look at 'engineering guides'. rmw
Nov 30, 2005 #3 mbeychok Chemical Jul 5, 1999 679 KFF: Take a look at faq798-1153 <== click here You may find it most useful. I am fairly sure that the methodology given in that FAQ would be applicable for a condensate flash drum operating under some vacuum. Milton Beychok (Visit me at www.air-dispersion.com) Upvote 0 Downvote
KFF: Take a look at faq798-1153 <== click here You may find it most useful. I am fairly sure that the methodology given in that FAQ would be applicable for a condensate flash drum operating under some vacuum. Milton Beychok (Visit me at www.air-dispersion.com)
