Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

*concrete

Status
Not open for further replies.
mambo5

mambo5

Structural
Joined
Dec 16, 2007
Messages
71
Location
GB
hi, anyone has successfully ran an analysis for concrete model (*concrete) with heat applied on it? need advise on that. thanks.
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
M
  • Locked
  • Question Question
Concrete friction
Replies
1
Views
2K
FEA way
FEA way
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D

Part and Inventory Search

Sponsor

Back
Top