Concrete Wedge Anchor Bolt Installation Tolerances?

[r.borghino]

Does anyone have a source where I can check installation tolerance criteria for concrete wedge anchor bolts? I have seen tolerance info from ACI and others but apply to embedded or cast in place structural components. I cannot find a source or suggestion for post-installed wedge anchors.

Specifically I'm looking for an installation "straightness" criterion, ie. how perpendicular the bolt is to the face of the concrete.
I appreciate it!

 

[Ingenuity]

Post-installed anchors usually have a 5 degree allowance based upon the ACI POST INSTALLED ANCHOR CERTIFICATION notes. I will try and clip a copy when I am back in the office.

 

[ANE91]

@Ingenuity nailed it, but I recall Hilti justifying 6 degrees.