Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete Smeared Cracking

Status
Not open for further replies.
turantug

turantug

Civil/Environmental
Jun 1, 2006
11
hi all,
I am trying to model a concrete beam with concrete smeared cracking option and i am using Abaqus 6.5 CAE. Is there a way to see the cracked elements, i couldnt figure it out. thanks in advance have a nice day.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
Concrete friction
Replies
1
Views
1K
FEA way
FEA way
C
  • Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
R
  • Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
S
  • Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
2
Views
177
Shreyas M
S
StanD_1
  • Locked
  • Question
Abaqus cylinder material orientation with concrete material
Replies
3
Views
307
StanD_1
StanD_1

Part and Inventory Search

Sponsor

Back
Top Bottom