Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete Slab in Fire

Status
Not open for further replies.
mehrafarid

mehrafarid

Structural
Joined
Dec 6, 2010
Messages
15
Location
US
I am modeling a concrete slab with shell element.

1. Can I show the temperature distribution in thickness of slab? How?

2. The HEAT FLUX should be given manually or it will be calculated by ABAQUS? If I must define manually, how can I calculated? Is it vaty with temperature?
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
M
  • Locked
  • Question Question
Concrete friction
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top