kitrak-rev
Student
Is there a CAD software that can help with the stress analysis for a manipulator in the deep sea for different configurations of the motor, to choose the best material
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Computational Fluid Dynamics Software requirement
- Thread starter kitrak-rev
- Start date
- Status
GregLocock
Automotive
Your thread title and your post seem to be out of sync. I think you are really asking about FEA, from "stress analysis ..., to choose the best material"
You might use CFD to get the applied forces, if the manipulator is moving quickly, but i doubt that's what you are getting at.
"different configurations of the motor" what do you mean by that?
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
You might use CFD to get the applied forces, if the manipulator is moving quickly, but i doubt that's what you are getting at.
"different configurations of the motor" what do you mean by that?
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Status
Similar threads
- Locked
- Question