Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compression Tester

Status
Not open for further replies.
Sivak Almajian

Sivak Almajian

Mechanical
Joined
Jul 9, 2019
Messages
2
Location
CA
Hello all,

I would like to know the pressure of one part when mated and clamped on the other part. In other words, does it exists a device where I can put it between two parts, when I clamp one part to the other, it gives me a pressure acting in one specific area.

Thank you,
S.
 
Sort by date Sort by votes
Hello,

Thank you for the sensor, but is the sensor flexible?
For example, the part is going into a cavity and I want to see the force or pressure on that area.
Can it bend or it is made for a straight line?

Thank you,
S.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top