Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compressibility factor Nitrogen 3

Status
Not open for further replies.
mikebb

mikebb

Mechanical
Joined
Feb 25, 2010
Messages
9
Location
GB
Can anyone please help me find the compressibility factor for Nitrogen at a temperature of 92 K, pressure 4.24 bar ? Thanks.
 
Sort by date Sort by votes
According to REFPROP it is 0.88261

David
 
Upvote 0 Downvote
Bara or Barg? (huge change)

Z= 0.8869 (@ 92K,4.24Bara)
Z= 0.0265 (@ 92K,4.24Barg/5.24Bara)

ChemCad Database (K:VAP H:SRK)
 
Upvote 0 Downvote
I would think 0.0265 a too high density for a vapor phase perhaps your simulator returns the density for liquid phase...
by the way similar values are calculated by my copy of Prode Properties (gas phase)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Locked
clean tube temperature factor
Replies
5
Views
3K
TinnedFishEnthusiast
TinnedFishEnthusiast
gahhhrrrlic
  • Locked
  • Question Question
Radiation view factor confusion
Replies
11
Views
812
georgeverghese
georgeverghese
youngengineerpl
  • Locked
  • Question Question
Fouling resistance factor in sludge application
Replies
3
Views
505
pierreick
pierreick
ArveS
  • Locked
  • Question Question
Nitrogen gas, calculate temperature change over time
Replies
3
Views
780
LittleInch
LittleInch
Smith55
  • Locked
  • Question Question
Heat Exchanger Fouling Factors for Air Separation Plant
Replies
6
Views
1K
sarahrad
sarahrad

Part and Inventory Search

Sponsor

Back
Top