Jan 25, 2011 #1 akvtech Mechanical Joined Nov 4, 2010 Messages 21 Location US Can someone tell me the aplicable code for fabricating compressed gas cylinders, with internal coating. >6" and up to 40' long
Can someone tell me the aplicable code for fabricating compressed gas cylinders, with internal coating. >6" and up to 40' long
Jan 25, 2011 #2 BigInch Petroleum Joined Jun 21, 2006 Messages 15,161 Location GB http://www.c-f-c.com/cyl/hp3aacyl.htmcompressed gas association http://www.cganet.com/ Upvote 0 Downvote
Jan 25, 2011 Thread starter #3 akvtech Mechanical Joined Nov 4, 2010 Messages 21 Location US Thanks...but I'm looking for standards that govern the fabrication of custom sized compressed gas cylinders not so much to purchase them Upvote 0 Downvote
Thanks...but I'm looking for standards that govern the fabrication of custom sized compressed gas cylinders not so much to purchase them
Jan 25, 2011 #4 israelkk Aerospace Joined Dec 30, 2002 Messages 2,280 Location IL Is it for commercial or military/aerospace use? Upvote 0 Downvote
Jan 25, 2011 Thread starter #5 akvtech Mechanical Joined Nov 4, 2010 Messages 21 Location US Petrochemical industry Upvote 0 Downvote
Jan 25, 2011 #6 BigInch Petroleum Joined Jun 21, 2006 Messages 15,161 Location GB Here's the EU specs. Its late here, so you find the others please. http://www.hse.gov.uk/cdg/stdcurr.htm Upvote 0 Downvote
Here's the EU specs. Its late here, so you find the others please. http://www.hse.gov.uk/cdg/stdcurr.htm