Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
composites
- Thread starter eli215
- Start date
rstupplebeen
Mechanical
You are going to have to get more specific than that to get practical help.
Try something like "I have a shell mesh and I am having trouble with the orientation of the composite material"
Rob Stupplebeen
Try something like "I have a shell mesh and I am having trouble with the orientation of the composite material"
Rob Stupplebeen
- Thread starter
- #3
SWComposites
Aerospace
And the problem is what???
What are you trying to model? What material? What do you have for property data?
What are you trying to model? What material? What do you have for property data?
You might like to try the manuals. They are actually very good you know, and search works nicely, e.g.in the V6.8 Docs
- Abaqus/CAE Users' Manual section 21.5.2 - Creating a composite layup
- Abaqus/CAE Users' Manual section 12.13 Creating and editing composite layups
- Abaqus Example Problems Manual section 1.1.24 Using a composite layup to model a yacht hull
- Abaqus/CAE Users' Manual section 21.5.2 - Creating a composite layup
- Abaqus/CAE Users' Manual section 12.13 Creating and editing composite layups
- Abaqus Example Problems Manual section 1.1.24 Using a composite layup to model a yacht hull
- Status
Similar threads
- Locked
- Question