Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Composite Fibre Modeling

Status
Not open for further replies.
Jalandhari

Jalandhari

Aerospace
Joined
Mar 24, 2005
Messages
3
Location
US
Hi

I have a fill-warp arrangement of carbon fibres ,no resin but held in place by two thin tapes.
I was wondering how would i simulate the fibre behavious in abaqus since abaqus only models the laminas.
Please suggest

thanks

 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
ZohrehA
  • Locked
  • Question Question
Eulerian Modeling
Replies
2
Views
2K
ZohrehA
ZohrehA
S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
A
  • Question Question
Need help modeling an elastomeric laminated bearing
Replies
3
Views
3K
FEA way
FEA way
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S

Part and Inventory Search

Sponsor

Back
Top