Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compensation Winding

Status
Not open for further replies.
Ant2004

Ant2004

Electrical
Joined
Jan 28, 2004
Messages
5
Location
SY
Is it possible to verify if a DC motor has a compensation winding or not? (Assuming no nameplate info)
 
Sort by date Sort by votes
Yes,

If the pole faces have slots in them and if there is a heavy gauge winding (and if it is connected). Then you have compensation.

Sometimes the series winding is mistaken for the compensation winding. The series winding is also heavy gauge, but on the poles (not in the pole faces).

 
Upvote 0 Downvote

yes, it is visible by simply looking into the pole faces of the machine..

it is wounded on the slotted pole faces, a flat big wire, with small turns, connected in series to carbon brushes as well to series field winding.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

edison123
  • Question Question
VFD increasing the motor winding temperature
2
Replies
22
Views
35K
iop95
iop95
NickParker
  • Question Question
API 546 - Sealed winding conformance
Replies
2
Views
675
Gr8blu
Gr8blu
A
  • Locked
  • Question Question
winding data
Replies
2
Views
3K
zlatkodo
zlatkodo
SA07
  • Question Question
How to test short in alternator rotor winding inside the slots?
Replies
6
Views
8K
Gr8blu
Gr8blu
KHA_LED
  • Locked
  • Question Question
Role of the tertiary winding of a 3-phase transformer
Replies
4
Views
2K
bacon4life
bacon4life

Part and Inventory Search

Sponsor

Back
Top