We are looking to buy a reasonably priced 3D drawing package to do our own in house design and draughting work. Products that we are interested in designing vary from plastic parts to machinery. Currently all 3D design work is done outside and so the drawing packages used vary between the diferent big names.
What we would like is to be able to modify these existing 3D drawings (usually in stp and igs format) with our own sources as well as start creating new ones.
Can anyone suggest if this is possible, if it is going to require tons of time to alter the drawings to our system and if inventor would be a suitable package? We have tried it out and at least for creating drawings, it seems to be ok.
Thanks for your help.
ANQ
What we would like is to be able to modify these existing 3D drawings (usually in stp and igs format) with our own sources as well as start creating new ones.
Can anyone suggest if this is possible, if it is going to require tons of time to alter the drawings to our system and if inventor would be a suitable package? We have tried it out and at least for creating drawings, it seems to be ok.
Thanks for your help.
ANQ