Compatibility with AutoCAD 2007

[greenlantern2099]

My company recently upgraded computers in my departemnt. Prior to this I was able to run Solidworks and a couple of sessions of AutoCad simultaneously with no problems. Now, however, if I open AC, SW starts bugging out. Somehow, the two programs are linked because there is a Solidworks menu in the AC file toolbar next to "Dimension", "Modify", etc. Has anyone experienced a similar issue? If so how did you correct it?

 

[CorBlimeyLimey]

http://www.eng-tips.com/viewthread.cfm?qid=258317

https://forum.solidworks.com/message/116659;jsessionid=C6501B700CEAF2B73AB13F7AAE4FD44A.node0

 

[ctopher]

As stated in the link by CBL, uninstall both, reinstall SW then ACAD.
Having ACAD then install SW screws up ACAD. I prefer to have only SW.

Chris
SolidWorks 09 SP5.0
ctopher's home
SolidWorks Legion

 

[greenlantern2099]

Thanks for the help. I removed the acad.rx file from the ACAD support folder and have not had anymore issues.