Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

compatibility between two "green" polymers

Status
Not open for further replies.
srjkdn

srjkdn

Aerospace
Joined
Apr 1, 2002
Messages
2
Location
US
Does anyone have any suggestions as to finding the compatibility between two polymers without fear of exotherming during cure, i.e. cyanate ester/epoxy, polyurethane/epoxy, cyanate ester/polyurethane, etc.?
 
Status
Not open for further replies.

Similar threads

andradesilva
  • Locked
  • Question Question
differences between 3D printing a part in metal and in polymer
Replies
2
Views
568
IRstuff
IRstuff
leekiefer
  • Locked
  • Question Question
Need recomendation for plastic that an be bolded with 1/4" wall thickness
Replies
2
Views
323
leekiefer
leekiefer
Azzazil
  • Locked
  • Question Question
Tolerances between parts of mold for injection molding
Replies
0
Views
284
Azzazil
Azzazil
Bozo_Sam
  • Locked
  • Question Question
Difference between Moulding shrinkage and thermal expansion
Replies
6
Views
1K
Harry.
Harry.
R.H
  • Locked
  • Question Question
PVC contaminated with POM "DANGEROUS" !!!
Replies
4
Views
644
Demon3
Demon3

Part and Inventory Search

Sponsor

Back
Top