Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compatability of zinc and aluminum as bearing material

Status
Not open for further replies.
shsmith57

shsmith57

Mechanical
Joined
May 2, 2005
Messages
1
Location
US
I have a low speed application (less than 5 rpm) in which I'm need to use a zinc casting for the bearing material and aluminum for the shaft (.50"). Can galling occur between the two with or with out lubrication? Loads are less than a 4 ounces.
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Bearing roughness specification
Replies
3
Views
6K
mcmalburg
mcmalburg
ferarri01
  • Locked
  • Question Question
spherical Bearing roller element Standard??
Replies
0
Views
1K
ferarri01
ferarri01
Muhammad Mazher
  • Locked
  • Question Question
Bearing RCA
Replies
1
Views
986
TugboatEng
TugboatEng
1athoti
  • Locked
  • Question Question
Bearing Capacity (Spherical Roller)
Replies
6
Views
5K
dvd
dvd
tk90
  • Question Question
Journal Bearings, Lead, and the ethics thereof
Replies
7
Views
5K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top