Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Comparison of FMEA standards IEC 60812 and MIL-STD-1629A.

Status
Not open for further replies.
I-DEAS

I-DEAS

Mechanical
Joined
Sep 29, 2017
Messages
7
Location
AU
Hi,

I'm considering comparing some FMEA standards, specifically IEC 60812 and MIL-STD-1629A.

But perhaps someone has already done this?

If so, are you interested in sharing?

Many thanks.



 
Status
Not open for further replies.

Similar threads

mahara7a
  • Locked
  • Question Question
Provision of Using Flexible Conduit in IEC Standard
Replies
1
Views
513
che12345
che12345
TugboatEng
  • Locked
  • Question Question
IEC Contactor with Transformer
Replies
5
Views
873
waross
waross
EEENGRX
  • Locked
  • Question Question
GROUNDING AND BONDING OF RAIL ROAD TRACKS
Replies
3
Views
3K
3DDave
3DDave
K
  • Question Question
Inrush current of transformer
Replies
11
Views
22K
bacon4life
bacon4life
A
  • Locked
  • Question Question
Difference between Final temperature and Fusion temperature of copper in earthing calculations
Replies
2
Views
2K
jghrist
jghrist

Part and Inventory Search

Sponsor

Back
Top