Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

comparison between inconel and ferralium

Status
Not open for further replies.

edfmm

Materials
Joined
May 6, 2003
Messages
4
Location
ID
We need to know the comparison between inconel and ferralium, because the existing valve material is ferralium but the new material valve is inconel. Please advice us whether inconel can replace ferralium
 

you need to be more specific about the valve service.

ultimately the valve supplier has to warranty(or needs to be involved) with the materials selection.
 
Hi edfmm

You will need to look at your specific requirements because in many instances the properties of Inconel(600) are inferior to Ferralium(255) eg lower design stress, poorer resistance to erosion and abrasion. However, if your Ferralium component was overdesigned you may find the Inconel more cost effective.....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top