Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Compact JP8 injector to convert Jet A-1 to JP8
- Thread starter umutp
- Start date
It's been a while (10 years) since I worked in this area, but I'm not sure it is just additives that are the difference. I would check the boiling range, flash point, smoke point, etc. Also, a lot of JP-8 is made to conform to international DERD spec for fungibility, so I'd check that spec as well.
- Status
Similar threads
