Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Commercial parts with GD&T drawings 1

Status
Not open for further replies.
italo314

italo314

Aerospace
Joined
Dec 4, 2015
Messages
1
Location
CA
Hi Everyone,
Does anyone have an idea about where to find commercial parts with GD&T drawings? Ideally, I would like to have parts such as castings or sheet metal, to practice realistic GD&T evaluation.
Thanks a lot!!
 
Sort by date Sort by votes
italo314,

What do you mean by "commercial parts"? Fabrication drawings are at least sort of proprietary, and are not released to the general public, outside of fabrication shops. Line drawings of commercial parts usually are not done to full GD&T.

--
JHG
 
Upvote 0 Downvote
There are a few example drawings in appendix B of the casting standard (Y14.8).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
GD&T without concentricity
2
Replies
23
Views
7K
mfgenggear
mfgenggear
ericscottf
  • Locked
  • Question Question
Proper GD&T for interrupted threads?
Replies
14
Views
1K
ericscottf
ericscottf
B
  • Question Question
How to convert linear dimensions to GD&T
Replies
17
Views
7K
bc23
B
G
nX / nSURFACES notation can be used for all the GD&T character?
2
Replies
20
Views
12K
pmarc
pmarc
DimaM
  • Locked
  • Question Question
GD&T: How to inspect tertiary datum feature position tolerances?
Replies
7
Views
1K
Burunduk
Burunduk

Part and Inventory Search

Sponsor

Back
Top