Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Combined sewer - Clarification

Status
Not open for further replies.

SMIAH

Civil/Environmental
Joined
Jan 26, 2009
Messages
482
Location
CA
Does sewer network separation increase peak flow rate? e.g. Installing a new stormwater sewer next to an existing sanitary (combined) sewer.
More precisely, if and only if the existing combined sewer is not able to carry a certain peak flow, installing a stormwater sewer that has the capacity to do so next to it and connecting it togueter somewhere downstream will increase the flow rate at this particular point (connection)?

This seems trivial to me... But I got mixed interpretation.
 
your question is not very clear. but if I understand - adding another parallel pipe upstream may not solve your capacity problem. The flow capacity downstream is controlled by the downstream pipe and that may also limit the capacity upstream.
 
But can it increase a flow capacity problem downstream? Increase the peak flow as the new stormwater has more capacity than the existing combined sewer.
 
assuming the sewers are not running supercritical, if you have restricted flow downstream, than adding more pipes upstream will have limited impact on the downstream capacity

But if you have excess capacity downstream and a restriction upstream, than adding another pipe upstream could increase the flow rate throughout both reaches.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top