Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Combination of welding procedure 1
- Thread starter eric37
- Start date
-
1
- #2
The short of it is that it permits you to use multiple PQR's to support a WPS, if the PQR was qualified on 1/2" material or greater. This is most useful in creating dual-process procedures (such as GTAW root pass with SMAW fill), and for increasing thickness qualified.
- Status
Similar threads
- Solved
- Question