Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Combination of Forces and SPCD
- Thread starter MOHK82
- Start date
not directly, the way you do it is:
sol 101
cend
$
load = 100
spc = 100
$
begin bulk
$
spcd,100,1000,1,0.040
spcd,100,1000,2,0.050
spcd,100,1000,3,0.060
$
spc1,100,123,1000
$
force,200,1000,,100.,1.,0.,0.,
$
load,100,1.,1.,200,
$
notice that the load card and the spcd card have the same id in the bulk, which is governed by the id of the load card in the case control section.
hope this helps!
sol 101
cend
$
load = 100
spc = 100
$
begin bulk
$
spcd,100,1000,1,0.040
spcd,100,1000,2,0.050
spcd,100,1000,3,0.060
$
spc1,100,123,1000
$
force,200,1000,,100.,1.,0.,0.,
$
load,100,1.,1.,200,
$
notice that the load card and the spcd card have the same id in the bulk, which is governed by the id of the load card in the case control section.
hope this helps!
- Status
Similar threads
