Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Combin14 element

Status
Not open for further replies.
mhisham1989

mhisham1989

Mechanical
Joined
Jun 17, 2013
Messages
9
Location
SG
Is it possible to model a single degree of freedom system using combin14 element and define material dependent damping for the same element as a real constant in ANSYS

Thanks
 
Sort by date Sort by votes
Hi mhisham... you should try combin14 element with keyopt 2 for 1D behavior for example KEYOPT,1,2,1 where 1 is element type, 2 is keyopt 2 and 1 is for 1D behavior in x direction only. For more information please see in the Ansys help of combine14 element.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

andradesilva
  • Locked
  • Question Question
How to change element type in ANSYS Workbench 2023 R1
Replies
1
Views
1K
SPDL310
SPDL310
SteffB
  • Locked
  • Question Question
Error: Bulk temperature is undefined for convection surface element
Replies
0
Views
451
SteffB
SteffB
Mert-41
  • Locked
  • Question Question
Welding Analysis with Element Birth/Death technique
Replies
0
Views
351
Mert-41
Mert-41
Tegguy
  • Locked
  • Question Question
ANSYS: Beam Elements vs Joint Stiffness?
Replies
11
Views
2K
Tegguy
Tegguy
Dany.96
  • Locked
  • Question Question
Plot resulting moment for Beam188 element
Replies
0
Views
282
Dany.96
Dany.96

Part and Inventory Search

Sponsor

Back
Top