Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Color of mirrored part

Status
Not open for further replies.
bigBboris

bigBboris

Mechanical
Joined
Feb 26, 2004
Messages
65
Location
US
For presentation purpose, I've colored model surfaces. But surfaces of mirrored part has not changed. Is there an option to copy surface colors while mirroring part?

Thank you.
 
Sort by date Sort by votes
Obviously not. Is it too late?
 
Upvote 0 Downvote
Try to edit the mirror feature and see if that option is available.
 
Upvote 0 Downvote
I believe the OP is using the Insert > Mirror Part method, which does not offer the "Propagate Visual Properties" option.
 
Upvote 0 Downvote
Yes, mirror part, not feature. So, there is no way?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K
  • Question Question
Solidworks Assembly - Using Mass Properties of part instance to control dimensions of parts in assembly
Replies
3
Views
3K
jassco
jassco
MDGroup
  • Question Question
Dual Dimension for Part Volume
Replies
4
Views
12K
ctopher
ctopher
K
  • Locked
  • Solved
Select parts of subassemblies
2
Replies
23
Views
9K
koubaleite
K
S
  • Locked
  • Question Question
Feature color on assembly with different apperance color
Replies
6
Views
622
SBaugh
SBaugh
JerryWong
  • Locked
  • Question Question
Hole callout in mirror part
Replies
4
Views
1K
SBaugh
SBaugh

Part and Inventory Search

Sponsor

Back
Top