Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coldbox manufacturer

Status
Not open for further replies.

Vacily

Petroleum
Joined
Feb 25, 2009
Messages
1
Location
RU
Hallo, all

Our company is now searching for a well-experienced coldbox manufacturer for gas processing. It is supposed, that NRU (32 m x dia 1.5 m) and demethanizer (25 m x dia 1.5 m) columns together with brazed aluminium heat exchangers, cold separators (2 x dia 1.5 m) will be located in one common coldbox, filled with perlite. We have finished P&ID and now we are considering 2 variants: our engineering and manufacturing on-side or engineering and manufacturing in one hands on-side.

Thank you
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top