Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cold Box Design, Air Separation 1
- Thread starter Sefrick
- Start date
-
1
- #3
controlnovice
Electrical
A cold box is like a fractionation column.
simplified:
Huge compressors liquify the air. This liquid is sent to the cold box (fractionation column) where it 'boils' off. Each gas has a different boiling temperature where it turns to gas and the location in the column where this takes place for each gas is where each of the take away lines are installed.
______________________________________________________________________________
This is normally the space where people post something insightful.
simplified:
Huge compressors liquify the air. This liquid is sent to the cold box (fractionation column) where it 'boils' off. Each gas has a different boiling temperature where it turns to gas and the location in the column where this takes place for each gas is where each of the take away lines are installed.
______________________________________________________________________________
This is normally the space where people post something insightful.
- Status
Similar threads
- Locked
- Question
