Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coatings/materials with low emissivity & low visibility

Status
Not open for further replies.
C22

C22

Mechanical
Joined
Sep 27, 2006
Messages
5
Location
US
I'm looking for materials and coatings that have low IR emissivity and also low visibility. I'd like to have the emissivity around 0.1 or less in the "mid-IR" range from 3um to 5um, and low reflectance and dark colors in the visible range from 0.4um to 0.7um.
Any ideas are appreciated.
 
Status
Not open for further replies.

Similar threads

Muhammad A
  • Locked
  • Question Question
Low IR value
Replies
5
Views
441
waross
waross
VLFit
  • Locked
  • Question Question
Low PD High Voltage Transformer Design
Replies
3
Views
488
Gr8blu
Gr8blu
Fingeneer
  • Locked
  • Question Question
VFD for EMC category C1 and low ground leakage current
Replies
1
Views
467
jraef
jraef
F
  • Locked
vfd WITH INDUCTION MOTOR AS Dyno
Replies
7
Views
3K
Far12312
F
kevc70
  • Locked
  • Question Question
Short Circuit Force on Bus Bars for Low Voltage Connection
Replies
6
Views
1K
7anoter4
7anoter4

Part and Inventory Search

Sponsor

Back
Top