Nov 22, 2004 #1 Petre Mechanical Joined May 27, 2002 Messages 24 Location US Which CNC software fits well with models from Solidworks. I must choose a CNC software and we use SW2003. Thank you.
Which CNC software fits well with models from Solidworks. I must choose a CNC software and we use SW2003. Thank you.
Nov 22, 2004 #2 SBaugh Mechanical Joined Mar 6, 2001 Messages 6,691 Location US Check out the Gold partners @ http://www.solidworks.com and get some Trial Software before you decide on the fly. REgards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 faq559-716 - SW Fora Users Upvote 0 Downvote
Check out the Gold partners @ http://www.solidworks.com and get some Trial Software before you decide on the fly. REgards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 faq559-716 - SW Fora Users
Nov 23, 2004 #3 aamoroso Mechanical Joined Mar 5, 2003 Messages 432 Location US I haven't used CAM in a few years but if you are doing Molds I would recomend SurfCam. Simple 2 and 3d machining I would go with Teksoft (I believe it is Camworks now). Upvote 0 Downvote
I haven't used CAM in a few years but if you are doing Molds I would recomend SurfCam. Simple 2 and 3d machining I would go with Teksoft (I believe it is Camworks now).