Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CMAA Allowable Stress Range

Status
Not open for further replies.
Trapperjimbo

Trapperjimbo

Structural
Jun 17, 2010
1
I am wondering if the CMAA #74 allowable stress range for box girders per joint category is for the weld stress, material stress or both?
 
Status
Not open for further replies.

Similar threads

m1208
  • Question
Redwood beam bending stress
Replies
6
Views
12K
gte447f
gte447f
waytsh
  • Question
IEBC Allowable 5% Gravity Increase on Total Load or Load Type?
Replies
6
Views
6K
HTURKAK
HTURKAK
engreg
  • Question
Link to the Vulcraft Table for allowable roofdeck overhang/cantilever
Replies
1
Views
406
Aesur
Aesur
D
  • Locked
  • Question
Reinforced Steel Yield Stress
Replies
4
Views
3K
HTURKAK
HTURKAK
VigAbaqusNoob
  • Question
Stress calculation over cross section
Replies
4
Views
2K
Stress_Eng
Stress_Eng

Part and Inventory Search

Sponsor

Back
Top Bottom