Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Closed cell elastomer o-ring
- Thread starter Geof2003
- Start date
- Thread starter
- #3
O-rings are not defined as closed cell or open cell as is sponge rubber . You need to decide what elastomer is proper for your application, eg., Nitrile, FKM (DuPont Viton), Silicone etc. Call a Parker o-ring distributor or go their web site, they will have a distributor finder in the or-ring division's site. I use Staver Hydraulics, but use whomever you are confortable with.
moldedrubber
Automotive
Colonial BPP in Dyersburg Tenn.Mauufacturers Molded sponge O rings.
- Status
Similar threads
- Question