Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Climbing formwork for cable-staqyed bridge

Status
Not open for further replies.

hmlilja

Structural
Feb 21, 2001
6
FI
Does anyone know any Japanese (or elsewhere from far east) based formwork-companies? I'm currently involved with cable-stayed bridge which is going to be built in Vietnam. Fancy finding a Japanese company (with internet site) for my Pylon formwork (climbing). I have the sites for 'Doka' and 'Peri' already, but they're European (me as well, BTW).

Also any information about climbing formwork systems would be appreciated (e.g. some reference project with time-tables etc. My pylons are 105m high H-shaped with cross beam at ~4/5-height, main cross section of legs is 3*3,5m with 1,5m diameter hole inside)

Thanks in advance

Heikki
 
Replies continue below

Recommended for you

Contact the HONSHU-SHIKOKU BRIDGE AUTHORITY for more information on the Takari bridge. This is a three span cable stayed structure with tremendous A-frame towers. Also, you might try a websearch of this bridge to obtain more information on it.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor