Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cleveland press question

Status
Not open for further replies.
SVanden

SVanden

Mechanical
Joined
Feb 25, 2003
Messages
17
Location
US
Does anyone have any info regarding old Cleveland presses? Our company has in storage what we believe to be 150 Ton OBI, and the number is 13-I-150. We are assuming that the 13 is stroke in inches, but we want to know for sure before we design/build tooling and pull it out of storage. And, it's not in an area where powering and cycling it would be feasible.

Thanks
 
Status
Not open for further replies.

Similar threads

Ragool
  • Locked
  • Question Question
Double Belt Press Conveyor Design - Sizing Drive Motor
Replies
6
Views
1K
dvd
dvd
Ebolfazl
  • Locked
  • Question Question
Brake press
Replies
4
Views
498
Ebolfazl
Ebolfazl
Tom the man
  • Locked
  • Question Question
Amada ITPS brake press
Replies
1
Views
360
MintJulep
M
Claypoolsbass
  • Locked
  • Question Question
Press fit a steel pin into aluminum
Replies
3
Views
2K
John Donlan
John Donlan
enginesrus
  • Locked
  • Question Question
Machine tool question
Replies
8
Views
639
SwinnyGG
SwinnyGG

Part and Inventory Search

Sponsor

Back
Top