Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cleaning Micrometer.

Status
Not open for further replies.
APH

APH

Mechanical
Joined
Sep 7, 2004
Messages
79
Location
US
I just got old and used (almost antique) micrometers and depth gage. It's pretty dirty and lot of particle/burr deposit in the reading scale. I'd like to take them apart and clean them inside and out before I calibrate them. What type of solution should I use?. MEK?..Acetone?? Any special detergent outhere that you guys use.

Thanks
APH
 
Status
Not open for further replies.

Similar threads

G
  • Locked
  • Question Question
Super duplex weld coupon cleaning -G48 Testing
Replies
2
Views
3K
GSB89
G
Ironhead17
  • Locked
  • Question Question
Stainless steel cleaning methods
Replies
5
Views
791
berkshire
berkshire
mcgyvr
  • Locked
  • Question Question
Cleaning procedure/equipment lead wave solder machine
Replies
0
Views
127
mcgyvr
mcgyvr
gibsoni
  • Locked
  • Question Question
Post Weld Cleaning of Aluminium
Replies
2
Views
204
coatingengineer
coatingengineer
Braxas
  • Locked
  • Question Question
Dry Ice Blasting Turbine cleaning
Replies
6
Views
316
Deon7
Deon7

Part and Inventory Search

Sponsor

Back
Top