Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Class 1 Div 1 and Div 2 Product Design Criteria sources?

Status
Not open for further replies.
mnucci

mnucci

Electrical
Joined
May 23, 2008
Messages
1
Location
US
Can anyone recommend a source for Class 1 Division 1 and Division 2 product design guidelines?

I understand the classification definitions but I am looking for a source for design specifications, electrical/mechanical/physical, for compliance with these environments. (A website, manual, consulting firm, etc.)

Any help would be appreciated. Thanks
 
Status
Not open for further replies.

Similar threads

norcalnewb
  • Locked
  • Question Question
Class I, Div 2 equipment in Zone 2 are in North America
Replies
1
Views
1K
mparenteau
mparenteau
trolex
  • Locked
  • Question Question
Class I, Division 2, rated accesories inside of typical NEMA 4X enclosure
Replies
2
Views
1K
trolex
trolex
rambopg
  • Locked
  • Question Question
Flex I/O inside Class II, Div 2 Area
Replies
3
Views
1K
zappedagain
zappedagain
BillTruby
  • Locked
  • Question Question
Class 1 Div 1 requirements and testing protocols
Replies
2
Views
1K
zappedagain
zappedagain
buzzp
  • Locked
  • Question Question
Class II Div 1 & 2 bonding
Replies
0
Views
941
buzzp
buzzp

Part and Inventory Search

Sponsor

Back
Top