NoviceSAPuser
Civil/Environmental
How do you calculate the capacity of a CJP weld that has tension and shear acting on it? Everything I have found has individual checks for welds that only have tension or shear but not both.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CJP Weld Strength
- Thread starter NoviceSAPuser
- Start date
- Status
Loading of welds with Eccentricity Normal to the Plane of the Faying Surface is on page 8-14 of the Steel Construction Manual (13th Edition). It is treated similarly to that as Eccentricity in the Plane of the Faying Surface.
If it is a CJP groove weld, failure is controlled by the base metal per Table J2.5
If it is a CJP groove weld, failure is controlled by the base metal per Table J2.5
- Status
Similar threads
- Locked
- Question
- Locked
- Question