Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Circular pattern in Assembly.

Status
Not open for further replies.
FBM

FBM

Aerospace
Joined
Feb 4, 2004
Messages
18
Location
FR
Hi
Can anybody suggest me if I can perform a circular pattern in assembly. using Catia V5R12.
Thx in advance.
 
Sort by date Sort by votes
Normally we re-use an exiting pattern in order to create a pattern in a assembly. The pattern (circular, rectangular or user), must be included in one of the parts that you are going to insert in your assembly. If you are talking about new features, well, I’ve checked for you the documentation of the enhancement of V5R12 but there is nothing mentioned about creating patterns from scratch within the assembly workbench.

I don’t know if this helps.


Alex Laurenceau
 
Upvote 0 Downvote
Hi Alex,
Thank you very much for ur reply. Actually I had put up my question in wrong way but anyway later I figured out the answer for my question.
But ur information was also very useful.
FBM
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SKimi
  • Question Question
Graph Tree Reorder in Product/Assembly
Replies
6
Views
5K
Little Cthulhu
Little Cthulhu
A
  • Question Question
Assembly Design Part Rename
Replies
3
Views
11K
jackk
jackk
A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo
C
  • Locked
  • Question Question
Select and authomise the insertion et assembly of components in a product
Replies
0
Views
622
catialearner
C
P
draw seal out of assembly
Replies
2
Views
1K
Rickyt
R

Part and Inventory Search

Sponsor

Back
Top