I am evaluating cleaning in place systems at my company and I am seekng literature that I can read. Currently we run the cip solution through the entire piping system at once only controlling the temperature and conductivity. I am seeking to reo control the velocity by determining the best cleaning method by run the solution through ceratin parts of the piping at a time until complete.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CIP
- Thread starter standg
- Start date
Go to
it is not my area but mybe it will be useful to you
luismarques
it is not my area but mybe it will be useful to you
luismarques
standg
Need more information, what industry are you in? What are you trying to clean?
As a rule of thumb, pipe velocities of around 1.5m/sec are needed or a Re greater than 10,000 i.e. fully turbulent flow are a reasonable start point.
Mark Hutton
Need more information, what industry are you in? What are you trying to clean?
As a rule of thumb, pipe velocities of around 1.5m/sec are needed or a Re greater than 10,000 i.e. fully turbulent flow are a reasonable start point.
Mark Hutton
- Status