Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CINT with blunt cracks

Status
Not open for further replies.
m_spence

m_spence

Mechanical
Joined
Apr 25, 2017
Messages
1
Location
GB
I am modelling blunt cracks in Ansys and wanted some guidance on using the CINT command. Specifically, if I have explicitly defined the notch radius, how do I define the crack assist node since the nodes on the inside of the crack will no longer align with the direction of crack propagation.

Thanks,
Matt
 
Status
Not open for further replies.

Similar threads

S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
andradesilva
  • Locked
  • Question Question
How to export to a text file results of analysis with material non-linearities, for all the substeps
Replies
0
Views
423
andradesilva
andradesilva
Avksent
  • Locked
  • Question Question
Solving the prestressing problem together with large deformations (ANSYS)
Replies
0
Views
228
Avksent
Avksent
Mert-41
  • Locked
  • Question Question
Welding Analysis with Element Birth/Death technique
Replies
0
Views
344
Mert-41
Mert-41
SteffB
  • Locked
  • Question Question
Ansys Workbench Transient Thermal, Problems with Single Frame Restart and Ekill
Replies
0
Views
433
SteffB
SteffB

Part and Inventory Search

Sponsor

Back
Top