Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Chromic and arsenic acid

Status
Not open for further replies.
Alwynb

Alwynb

Mechanical
Joined
Aug 13, 2002
Messages
23
Hi there,
I am looking for a source of metal material recommendations for a tank to be filled with Chromic and Arsenic acid with water. A pointer in the right direction would be appreciated.
Thanks
 
Sort by date Sort by votes
What temperature and what concentrations for the acids?
 
Upvote 0 Downvote
Thanks for the reply. The temperature is 40°C max and 33% of each acid and then 33% water.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kabootarman
  • Question Question
Soft Seats in Acid Gas service
Replies
1
Views
3K
SJones
SJones
V
  • Question Question
PE/PP in Concentrated Sulfuric Acid Service
Replies
2
Views
4K
Vahid.A
V
midsidenode
  • Locked
  • Question Question
phosphoric acid anodizing
Replies
3
Views
1K
3DDave
3DDave
Csqiz
  • Locked
  • Question Question
Sulphuric acid Storage and piping system
Replies
8
Views
2K
EdStainless
EdStainless
SETXINSP
  • Locked
  • Question Question
Conc Sulf Acid Damage to Alloy 20??
Replies
16
Views
1K
SETXINSP
SETXINSP

Part and Inventory Search

Sponsor

Back
Top