Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CHILLER CARRIER, BEFORE/WATER, AFTER/GLYCOL

Status
Not open for further replies.
arfan

arfan

Electrical
Joined
Feb 5, 2003
Messages
9
Location
MX
I have a chiller Carrier 30GTN210. AT THE MOMENT WORK COOLING WATER. BUT I WANT to PASS IT so that WORK COOLING GLYCOL FOR TERMOACUMULACION. I have READ IN THE MANUAL THAT I should BUY THE module EMM to PROGRAM THEIR CYCLES OF WORK. IT ALSO SAY THAT I should CHANGE THE HOLE OF THE ELECTRONIC EXPANSION VALVE.

IF I CHANGE THE HOLE HOW OBTAIN SEVERAL SETTINGS??
 
Sort by date Sort by votes
Easiest way out. Talk to the local Carrier service guy.

HVAC68
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C
  • Locked
  • Question Question
Changing from Glycol to Water Cooled Chiller
Replies
5
Views
4K
Antifed
Antifed
H
  • Locked
  • Question Question
Water Chiller selection
Replies
4
Views
3K
SAK9
SAK9
123131415
  • Question Question
REQUIREMENT OF COOLING TOWER IN WATER COOLED CHILLER SYSTEM
Replies
6
Views
15K
SAK9
SAK9
Wayne _ Lunar
  • Question Question
PICV Installation for Chiller pipe
Replies
4
Views
8K
MaxvonZ
MaxvonZ
H
  • Question Question
Chiller cooling loop for multiple cosmetics mixing machines - need advice
Replies
12
Views
14K
cat.smith
C

Part and Inventory Search

Sponsor

Back
Top