DanTheMan
Mechanical
- Mar 30, 2001
- 10
I am creating a piping specification for concentrated sulfuric acid. We have Kynar for indoor applications, but for outdoor applications we intend to use Alloy 20 (Carpenter 20). From my research I have seen chemical compatibility tables that say that it is ok, questionalbe, and not acceptable. So I am asking any one with some knowledge or experience in this subject out there if Alloy 20 is suitable for piping approximately 90-94% concentrated sulphuric acid. The temperatures are ambient (-40F to 120F)
Tanks:
Dan The Man
Tanks:
Dan The Man